|
"7423" - 1962-68 22" B-Body Radiator Fan Shroud -
$249 each Steel fan shroud for use on 1962-68 B-Body cars with V-8 and 22” radiator. Two piece unit with formed fan opening lip, hose reliefs, and contours of an original part. Top and bottom stiffener is spot welded in place like original. Made from 16 ga steel like original and powder coated low gloss black. Comes complete with both hex coni sems nuts to secure the two halves together. Used on both Small and Big Block applications. Reference P/N 2417 423 & 2417 427 Mounts to radiator with HWC mounting kit #9212 for 1962-65 cars or kit #9555 for 1966-68 cars (see kits below). |
![]() |
"9212" - Fan Shroud Mounting Bracket Kit -
$59 per Kit The kit includes (4) powder coated formed steel brackets, (4) correct 1/4-20 cage nuts for the radiator side brackets, and (8) 1/4-20 x 1/2" hex head coni sems bolts to mount the parts together. Used on 1962-65 B-Body cars with steel fan shrouds and 22" radiators. Also used on 1966 A-Body cars with V-8 and 22" radiator. CLICK HERE to view instructions on how to install cage nuts. One kit required per vehicle. |
![]() |
"9555" - Fan Shroud Mounting Bracket Kit -
$59 per Kit The kit includes (4) powder coated formed steel brackets, (4) correct 1/4-20 cage nuts for the radiator side brackets, and (8) 1/4-20 x 1/2" hex head coni sems bolts to mount the parts together. Used on 1966-68 B-Body cars with steel fan shrouds and 22" radiators. CLICK HERE to view instructions on how to install cage nuts. One kit required per vehicle. |
![]() |
"435" - 26" C-Body Radiator Fan Shroud -
$200 each An excellent reproduction of the 1966-70 C-Body 26" radiator fan shroud. Original part number 2785 435. Correct for all V-8 cars using a fan shroud with 26" radiator including Polara, Monaco, Fury, Chrysler 300, and New Yorker. Injection molded from high-temperature resistant material with all of the details of an original part. |
![]() |
"614" - 22" A-Body Radiator Fan Shroud -
$200 each An excellent reproduction of the 1968-69 A-Body 22" V-8 radiator fan shroud. Original part number 2785 614. Correct for all V-8 cars using a fan shroud including 273 & 318 with A/C, 340, 383, and 440 powered Darts, Valiants, and Barracudas. Injection molded with all of the details of an original part. |
![]() |
"325" - 22" A-Body Radiator Fan Shroud -
$200 each An excellent reproduction of the 1970-72 A-Body 22" V-8 radiator fan shroud. Original part number 2998 325. Correct for all V-8 cars using a fan shroud including 318 with A/C, 340, and 360 powered Darts, Valiants, Dusters, and Demons. Injection molded with all of the details of an original part. |
"130" - 22" B & C-Body Radiator Fan Shroud -
$200 each An excellent reproduction of the 1969 B- & C-Body 22" V-8 radiator fan shroud. Original part number 2949 130. Correct for 1969 440 powered cars with 22" radiator including Chargers, R/T's, GTX's, and various C-Body models. Injection molded with all of the details of an original part. NOTE: Can also be used on 1966-68 318, 383, and 440 powered B and C-Body cars in conjunction with the #9176 Fan Shroud Mounting Bracket Kit (see above) when used on original equipment radiators that would normally use a steel shroud. Will also work on 1969 22" B & C-Body V-8 radiators used for 318 and 383 equipped cars |
|
"328" - 22" B & E-Body Radiator Fan Shroud -
$200 each An excellent reproduction of the 1970-73 B- & E-Body 22" V-8 radiator fan shroud. Original part number 2998 328. Correct for all V-8 cars using a fan shroud with 22" radiator including 318, 340, 383, and 440 powered Challengers, Barracudas, Chargers, Road Runners, Satellites, Coronets, Super Bees, R/T's, and GTX's. Injection molded with all of the details of an original part. |
|
![]() |
"9176" - Fan Shroud Mounting Bracket Kit -
$70 per Kit The kit includes (2) powder coated formed steel brackets, (4) correct 1/4-20 cage nuts for the radiator side brackets, and (4) 1/4-20 x 1/2" hex head coni sems bolts to mount the brackets to the radiator. Used on 1969-73 B-Body and all E-Body cars with the 2949 130 or 2998 328 fan shroud and 22" radiator. Also used on 1969-72 C-Body cars and 1972-79 Dodge trucks with 22" radiator. CLICK HERE to view instructions on how to install cage nuts. One kit required per vehicle. |
![]() |
"875"
- Radiator Fan Shroud Nuts -
$3 Each Special flange lock nuts used to secure the plastic radiator fan shrouds to the radiator mounting studs. Cadmium plated as original. Use 5 nuts on 1966-69 B-Body 26" radiators, 6 nuts on 1966-70 C-Body radiators, and 4 nuts on 1969 B-Body 22" radiators. |
![]() |
"6071"
- Fan Clutch Mounting Kit -
$15 Each An excellent fastener kit that includes the correct zinc phosphate plated 5/16-24 rolled thread studs, conical washers, and hex nuts to mount Chrysler fans to the thermal drive clutch assembly. |
![]() |
"A"
- Big Block Heater Hose Bracket - $20 Each 1969-1974 Non-Air Conditioned Big Block & Hemi Applications. Bolts to alternator triangle support bracket. Made from correct gauge steel, cadmium plated & thermo-plastic coated for original appearance. |
![]() |
"AX43" - Small Block Heater Hose Bracket - $20 each 1970 & Later Small Block Applications. Bolts to right cylinder head. Made of correct gauge galvanized steel & thermo-plastic coated for original appearance. |
|
"B" - Heater Hose Bracket - $17 Each 1969-1970 B-Body and 1969 Big Block A-Body Applications Bolts to right inner fender panel above shock tower. Includes correct hex head mounting screw. Made from correct gauge steel and cadmium plated as original.
|
![]() |
"C" - Heater Hose Bracket - $12 each 1966-1968 Hemi B-Body , 1963-1966 A-Body, 1960s Pickups Bolts to right inner fender panel above shock tower. Includes correct hex head mounting screw. Made from correct gauge steel and cadmium plated as original. |
![]() |
"D"
- Big Block Heater Hose Bracket -
$15 each Some 1967 & All 1968 Big Blocks with A/C, Also Some Non-A/C Applications. Use on Big Block A-Body Applications. Fastens into tabs on top of right valve cover. Made from correct gauge steel and cadmium plated as original. |
![]() |
"E"
- Big Block Heater Hose Bracket -
$11 each Some 1967 & All 1968 Non-A/C Big Block Applications Fastens into tabs on top of right valve cover. Made from correct gauge steel and cadmium plated as original. |
![]() |
"V" - Big Block Heater Hose Bracket - $20 each 1968 & Prior Non-A/C Big Block & Hemi Applications. Bolts to alternator triangle support bracket. Made from correct gauge cadmium plated steel & thermo-plastic coated for original appearance.
|
![]() |
"V2"
- Big Block Heater Hose Bracket - $22 each 1967-68 all Big Block with A/C applications. Also used on 1969 Imperial applications with A/C. Bolts to alternator on top of adjusting strap #987SAC. Made from correct gauge steel, zinc plated & thermo-plastic coated for original appearance. |
![]() |
"0057" - Heater Hose Tie Strap - $7.50 Each 1960-1978 Used to strap heater hose to A/C line on right side of engine or just the heater hoses together. Made from correct gauge and temper aluminum for original appearance. Usually 2 required per vehicle.
|
![]() |
"0058" - Big Block Heater Hose Bracket - $20 each 1969-74 Big Block Air Conditioning Applications. Bolts to #987TAC alternator mounting triangle. Correct 5/16-18 mounting bolt provided. Made from correct gauge steel, powder coated low gloss black & then thermo-plastic coated for original appearance. Reference Chrysler part 2951 014.
|
![]() |
"HNK-1"
- Heater Hose Nipple Kit -
$15 per set Big block and Hemi heater hose nipples for 1964-1969 vehicles using 5/8" heater hose. Patterned after original pieces and zinc plated to prevent corrosion. Reference Chrysler parts 1779 257 & 1971 061. One kit required per vehicle. Not made in USA. |
![]() |
"HNK-2"
- Heater Hose Nipple Kit -
$15 per set Big block and Hemi heater hose nipples for 1970 and later vehicles using 1/2" and 5/8" heater hose. Patterned after original pieces and zinc plated to prevent corrosion. One kit required per vehicle. Not made in USA. |
![]() |
"HNK-3"
- Heater Hose Nipple Kit -
$33 per set Small block LA engine heater hose nipples for 1964-1969 vehicles using 5/8" heater hose and 3/4" by-pass hose. Patterned after original pieces and zinc plated to prevent corrosion. Long nipple should be installed in water pump and short nipple in intake manifold. One 4-piece kit required per vehicle. Not made in USA. |
![]() |
"HNK-4"
- Heater Hose Nipple Kit -
$17 per set Small block LA engine heater hose nipples for 1970 & later vehicles using 1/2" and 5/8" heater hose and 1" by-pass hose. Patterned after original pieces and zinc plated to prevent corrosion. One kit required per vehicle. Not made in USA. |
![]() |
"HNK-5"
- Heater Hose Nipple -
$8.50 each Nice reproduction of the heater hose nipple used on 1969 C-Body Big Block applications, as well as early production 1970 applications when the 3/8 NPT 1969 water pump housings were used. Also is used on most aftermarket Small Block intake manifolds for 1970 and later vehicle applications requiring the 1/2” heater hose connection. Machined like originals with 3/8” NPT threads and clear zinc plated for corrosion resistance. Reference Chrysler part number 2936 298. Not made in USA.
|