|
"AX0029-225"
- 2 1/4" Exhaust Manifold Flange -
$12 Each Made from 3/8" thick steel for 2 1/4" ID flanges used on various non-HP applications. Don't settle for those flimsy 1/4" plate flanges offered by most exhaust shops that warp and leak. 2 required per vehicle. |
|
"AX0029-250"
- 2 1/2" Exhaust Manifold Flange -
$12 Each Made from 3/8" thick steel for 2 1/2" ID flanges used on all 1967-74 High Performance Chrysler engines. Don't settle for those flimsy 1/4" plate flanges offered by most exhaust shops that warp and leak. 2 required per vehicle. |
![]() |
"029"
- 2 1/2" Exhaust Manifold Flange
Gasket -
$7.50 Each Excellent reproduction of the 2 1/2” exhaust manifold flange gasket used on 1967-74 high performance engines. Stamped from correct temper steel with all of the details of an original part. Black oxide & oil seal finished as original. Don’t settle for those nasty fiber gaskets that fail and leak. Chrysler engineers knew best! Reference Chrysler part number 2856 029. Not made in the USA. |
![]() |
"1223" - Small Block Exhaust
Manifold Conical Washer -
$2.50 each Excellent reproduction of the thick conical washer used under every bolt and nut that secures Small Block exhaust manifolds to the head surface. 10-12 washers required for each engine. Washers sold individually. Reference Chrysler P/N 2121223.
|
![]() |
"OML" - 1968-70 340 HP Exhaust Manifold
Sleeve Nut -
$9 each Correct 5/16-24 UNF x 2.50" hex head sleeve nut. Two required per vehicle.
|
![]() |
"OMW" - SHORT Big Block Exhaust Manifold
Sleeve Nut -
$9 each Correct 3/8-24 UNF x 1.94" hex head sleeve nut. See kits below for required quantities for each vehicle. |
![]() |
"OMK" - LONG Big Block Exhaust Manifold
Sleeve Nut -
$9 each Correct 3/8-24 UNF x 2.84" hex head sleeve nut. See kits below for required quantities for each vehicle. |
"8135" - 1968-70 340 HP Exhaust Manifold Fastener
Kit - $64 per kit Correct bolts, studs, nuts, conical washers, & sleeve nuts. |
|
![]() |
"8023" - 1971-74 340 & 360 HP Exhaust Manifold
Fastener Kit -
$58 per kit Correct bolts, hex collar stud, studs, nuts, & conical washers. |
![]() |
"8061"- 1966-69 Big Block Low Performance Exhaust Manifold Fastener Kit - $28 per kit Studs, nuts, & sleeve nuts. For use on 361 and 383 big block low performance (2-barrel) applications. |
![]() |
"8062"- 1962-65 Street Wedge Exhaust Manifold Fastener Kit - $44 per kit Studs, nuts, & sleeve nuts. For use on 361, 383, and 426 big block B-Body applications. |
|
"8063"- 1967 440 HP Exhaust Manifold Fastener Kit - $55 per kit Studs, nuts, & sleeve nuts.
|
"8065"
- 1968-74 383/440 HP Exhaust Manifold
Fastener Kit -
$45 per kit B & E-Body ONLY! Studs, nuts, & sleeve nuts. |
|
"8065A"
- 1967-69 383/440 HP Exhaust Manifold
Fastener Kit -
$52 per kit A-Body ONLY! Studs, nuts, & sleeve nuts. |
|
"8065C"
- 1968-71 383/440 HP Exhaust Manifold
Fastener Kit -
$59 per kit C-Body ONLY! Studs, nuts, & sleeve nuts. |
|
"8066"
- 1966-71 426 Hemi Exhaust Manifold
Fastener Kit -
$90 per kit Correct head marking bolts and conical washers. |
|
![]() |
"8067"
- Max Wedge Exhaust Manifold Fastener Kit
- $39 per kit Studs, nuts, & sleeve nuts. |