hwc_logo_qtr.jpg (21587 bytes)

"AG16" -  Air Grabber Seal Mounting Kit - $35 Each

Correct zinc plated #10 hex coni sems screws with “AF” head markings and zinc phosphated U-nuts for mounting the Air Grabber hood seal to the fiberglass plenum.  Used on 1970-72 Plymouth and 1971 Dodge Air Grabber hoods.  16 sets of screws and U-nuts included.

"AG24" -  Air Grabber Seal & Air Box Mounting Kit - $45 Each

Correct zinc plated #10 hex coni sems screws with “AF” head markings and zinc phosphated U-nuts for mounting the Air Grabber or Ramcharger hood seal to the fiberglass plenum, and 8 sets are used to fasten the air box to the hood.  Used on 1969 Plymouth Air Grabber and 1969 Dodge Ramcharger hoods.  24 sets of screws and U-nuts included.

 

"AG34" -  Air Grabber Seal & Air Box Mounting Kit - $65 Each

Correct zinc plated #10 hex coni sems screws with “AF” head markings and zinc phosphated U-nuts for mounting the Ramcharger hood seal to the fiberglass plenum, and 18 sets are used to fasten the air box to the hood.  Used only on 1970 Dodge Ramcharger hoods.  34 sets of screws and U-nuts included.

 

"8038" - Shaker Bubble to Base Fastener Kit (7 screws) - $25 per kit

Seven correct "anchor" head 10-24 screws for mounting shaker bubble to steel base plate.

ax0030.JPG (7431 bytes) "AX0030" - 1969 1/2 B-Body Fiberglass Lift-Off Hood Pin Brackets - $35 per Pair

Quality reproduction to be used on original cars or with a reproduction hood.  Pair of brackets comes welded and dipped in red oxide primer, ready for paint.

0051.jpg (3071 bytes)

 

"0051" - 1968-69 Dart GTS & Swinger Hood Insert Gaskets - $15 per set

Die cut from original style and thickness of black plastic.  Prevents chipping of hood paint when hood inserts are installed.   Fits under chrome performance hood inserts found on Swingers and GTS Darts.

 

0052.jpg (5999 bytes) "0052" - 1968-69 Super Bee & R/T Power Bulge Hood Insert Gaskets - $18 per set

Die cut from original style and thickness of black plastic.  Prevents chipping of hood paint when hood inserts are installed.  Fits under chrome Power Bulge hood inserts found on Super Bee and R/T.

0053.jpg (5294 bytes)  

"0053" - 1969 Road Runner & GTX Hood Insert Gaskets - $18 per set

Die cut from original style and thickness of composite gasket material.  Prevents chipping of hood paint when hood inserts are installed after painting separately.  Can also be used on 1968 cars that originally used a formed plastic gasket.

 

"0055" - Late 1969-70 Air Grabber/Ramcharger Vent Seals - $30 per set of four

Set of four die cut rubber seals with correct sealing wire clips.  Two used on each side of the Air Grabber/Ramcharger plenum to allow water (as well as small birds, bugs, and Chevy parts!) to exit, while keeping the hot engine compartment air out.

Often missing or painted over.   This version found on later 1969 model cars and 1970 Dodges.  Plenum for this style has two square holes on each side, one under each seal.

"0056" - Early 1969 Air Grabber Vent Seals - $30 per set

Set of two die cut rubber seals with correct sealing wire clips.  One used on each side of the Air Grabber/Ramcharger plenum to allow water (as well as small birds, bugs, and Chevy parts!) to exit, while keeping the hot engine compartment air out.

Often missing or painted over.   This version found on early 1969 model cars.  Plenum for this style has 3 larger rectangle openings on each side.

 

Home

View printable version of this page

How to purchase HWC parts